The Classifier Assembly allows you to take a sample, remove fines, and classify your product by the Stokes' parameters of size, shape, and density (moisture).
This divider is made to meet F.CI. and B.I.S. Requirements. Material flowing components are made by a special process, to give a smooth finish. Hand made without welding or joints. It is used to reduce the size of a grain/seed sample into two halves, each exactly representative of the original sample. To operate this device, a sample of grain is poured into the hopper and then released down the cone, directly under the center of the opening.
The GAMET TYPE DIVIDER is used for dividing and mixing grain samples and performs accurately on all grains, seeds, feeds etc. Sample division and mixing are carried out by centrifugal action of motor driven, revolving neoprene disc positioned under hopper. Smooth inside finish virtually eliminates any of the sample sticking to inner surfaces.
These hand held sample dividers will subdivide material samples into smaller portions by single or multiple passes.
The important feature of Endecotts sample dividers is that each subdivision retains the characteristics of the original sample.
Produced in 316 stainless steel
ROTARY SAMPLE DIVIDER
The HMK Rotary Sample Divider is a sample quantity reduction device, used for the physical or chemical analysis of dry powders in the laboratory.
This equipment can automatically, quickly and effectively divide the samples
into 1 up to 50 portions; each portion has the same representation of the original sample. It consists of
control panel, vibration feeder, sample collector and sample cleaning device, etc.
HOME
