• Made from high quality 316
stainless steel
• Wide range of sizes
• Simple to use
LENGTH 300 mm - 2000 mm
VOLUME .25 ml - 100 ml
• Single Point
• 316 stainless steel, bright finish
• Adjustable Length - use extension rods
to make the sampler the required length
LENGTH 1000 mm - 3000 mm
VOLUME 100 ml - 200 ml
675 1220
Multilevel Sampler for taking
discrete samples
LENGTH 300 mm - 2000 mm
VOLUME PER POCKET 15 ml - 90 ml
675 1320
• Single point
• 316 stainless steel or HDPE
Available w bottle holder, or plain cap / no cap
LENGTH 400 mm - 420 mm
VOLUME UP TO 500 ml
675 1290
• 316 stainless steel construction
• Variable sample volumes 5ml to 60ml
• Range of sampler lengths
• Suitable for free flowing powders and granules
LENGTH 1000 mm - 2000 mm
VOLUME 5 ml - 60 ml per pocket
WHITESTONE VA
TEL (804) 318-3686 FAX (703) 991-7133
INFORMATION@QCLABEQUIPMENT.COM
Copyright 2012: QAQC Lab | Particle Measurement System | All rights reserved.
MANUAL OR PNEUMATIC OPERATION
Made from 316 stainless steel.
LENGTH 1000 mm
VOLUME 150 ml
SINGLE ZONE SAMPLERS
BY VOLUME
MULTI ZONE & CROSS SECTIONAL SAMPLERS
BY VOLUME
675 1215
POWER SAMPLER FOR
COHESIVE OR FREE
FLOWING POWDERS
300 mm to 1200 mm INSERTION
• Made from high quality 316 stainless steel
• Adjustable - takes a range of sample sizes
• Simple to use
LENGTH 350 mm - 500 mm
VOLUME Variable between 0.01 and 0.1ml
675 1245
• Multilevel Unit Dose Sampling
• Take one, two or three samples at each sampling height
• 316 stainless steel
VOLUME MADE TO ORDER
• Single Point Unit Dose Sampler
• 316 stainless steel
• Use extension rods to increase the
length of the sampler
LENGTH 600 mm - 1200 mm
VOLUME .1 ml - 2.5 ml
• Single Point Unit Dose
• 316 stainless steel
• Suitable for use with sticky,
cohesive powders
LENGTH 1000 mm
VOLUME .25 ml - 1.0 ml
675 2250
• Cross sectional sampler
• 316 stainless steel
• Suitable for sticky cohesive powders
190 ml - 520 ml
675 2220
• Multilevel (discrete samples)
• 316 Stainless steel construction
• Suitable for sticky, cohesive powders
LENGTH 600 mm - 1500 mm
VOLUME PER POCKET 15 ml - 20 ml
EQUIPMENT FOR QUALITY CONTROL AND R&D
Telephone (804) 318-3686
Toll Free US (866) 244 1578
Fax (703) 991-7133
Hours 8 AM - 6 PM EST
INTERNATIONAL & DOMESTIC SALES
CUSTOMER SERVICE * SALES * TECHNICAL SUPPORT
DELIVERIES WORLDWIDE
PERFORMANCE GUARANTEE
675 1120A01
• Lightweight
• Easy to use
• Cross sectional sample
• Patented design
LENGTH 2000 mm
VOLUME 8 LITERS
675 1230
• Manufactured from 316 stainless steel
• Satin polish (Ra< 1microns)
• Take Multiple Samples from the same Point
• Range of sampler lengths
• Change the sample volume by changing the insert
• Special finishes and materials of construction
available on request
LENGTH 300 mm - 1800 mm
VOLUME PER SAMPLE INSERT .1 ml - 4.0 ml
• Single Point
• 316 stainless steel
• Suitable for cohesive powders
VOLUME 5 ml - 25 ml
675 1210
• Cross section, composite sample
• Suitable for taking large volume samples
LENGTH 300 mm - 2500 mm
VOLUME 45 ml - 2900 ml
HDPE (AVAILABLE STERILE)
LENGTH 1000 mm
VOLUME 100 ml
20 PER BOX
675 8060H
HDPE (AVAILABLE STERILE)
LENGTH 500 mm - 1000 mm
VOLUME SAMPLED
1 ml - 20 ml
20 PER BOX
675 8063H
HDPE (AVAILABLE STERILE)
LENGTH 400 mm - 950 mm
VOLUME 75 ml - 200 ml
675 8073H
HDPE (AVAILABLE STERILE)
LENGTH 620 mm - 1000 mm
VOLUME 100 ml - 500 ml
675 8085A
HDPE (AVAILABLE STERILE)
LENGTH 400 mm
100 PER BOX
• Large 100 ml sample size
• For use with free flowing
and cohesive powders
• 316 Stainless Steel
LENGTH 1000 mm - 2000 mm
VOLUME 100 ml
USE WITH RACK OR
SEALING SLEEVES
675 8011K
The sampler comes complete with an extendable handle that
can be extended to the correct length for easy swabbing. An
adjustable adapter allows the swabs etc. to be angled to meet
the contours of the item being sampled.
LENGTH 830 mm - 3200 mm
SOLIDS & SPECIAL APPLICATION SAMPLERS
The Telescopic Powder Sampler is designed for use with free-flowing powders, granules and grains.
The handle can be quickly and easily extended to the desired length. The Telescopic P wder Sampler
enables samples to be quickly and easily taken from depths of up to 6m
675 1035
LENGTH 720 mm - 6000 mm
1 liter Rover Sampler 500 ml Rocket Sampler
AVAILABLE WITH AUGER FOR COMPACTED POWDERS
AVAILABLE WITH BLADES FOR COHEIVE POWDERS
Standard Tip - suitable for most situations. The standard tip has a 60° point
Round Tip - ideal when you need to ensure that the sampler will not harm the surrounding equipment. For example - when sampling close to a mesh screen.
Pointed Tip - ideal for use with hard or dense products, the tips have a 25° point
Fast Unit Dose Sampling
Minimize Sampling Error
This Unit Dose Sampler is the next generation in sampling technology. It combines a single use disposable sample cell with a reusable stainless steel sample thief.
EMPTIES THROUGH
END OF SAMPLER
(BOTTLE ADAPTER AVAILABLE)
Powder Tips are available between 1 ml, and 200 ml
• Telescopic rod extends up to 6m
• Range of different sized sample collecting Chambers
• Suitable for powders and granules
• 316 stainless steel construction with PTFE clutch
TELESCOPIC ALUMINUM HANDLES
TELESCOPIC 316 STAINLESS STEEL HANDLES
SAMPLING EQUIPMENT FOR POWDERS, GRANULARS, AND SOLIDS
MANUFACTURING
DISTRIBUTION
TECHNICAL SERVICES FOR
ANALYTICAL INSTRUMENTATION
TELEPHONE (804) 318-3686
TOLL FREE (866) 244-1578
COMPLETE INTERACTIVE SAMPLER CATALOGUE
PDF DOWNLOAD
• Made from high quality 316 stainless steel
• Adjustable - takes a range of sample sizes
• Simple to use
LENGTH 350 mm - 500 mm
VOLUME Variable between 0.01 and 0.1ml
Narrow sampling blade enables
samples to be taken from very
small containers such as vials.
• Individually Bagged
• FDA & EU 10/2011
Conforming Materials
• BSE/TSE Free
• Full Batch Traceability
• Available Sterile
Stainless Steel Rods 820 mm - 4500 mm
Aluminum & Plastic Rods 750 mm - 6000 mm
New! Segmented Unit Dose Sampler
Sampling from small spaces
Locking Connector
HOME
